Craft Supplies + sprayer white new

When using vellum- spritz PaperGlide™ into the air- and “waft” the vellum through the mist from the side. You are virtually guaranteed a smooth- even coverage with no water droplets. IMPORTANT NOTICE Please keep the clear cap on the fine mist sprayer after use. Placing a moist cotton ball in the clear cap will ensure best sprayer performance. On rare occasions and in dry environments- the spray nozzle could dry out and become less effective. If your sprayer ever becomes a bit clogged- no problem! Simply take your bottle over to the sink and run warm water over the nozzle- which should do the trick. If necessary- you might use a little liquid soap on a toothbrush and scrub the nozzle gently. It should spray as good as new! Stubborn clogs can be freed by pulling off the white plunger and putting a few drops of E-Z Tool™ Cleaner inside the cap. Just let it sit for a few minutes. Pour out the cleaner. Reassemble the cap and spritz away! Fine bristle brushes also work to open the misting